ºìÌÒÊÓƵ

Translators | MC100EPT622

Translator, 10-bit LVTTL / LVCMOS to LVPECL

Active

Datasheet

ºìÌÒÊÓƵ

Overview

The MC100EPT622 is a 10-Bit LVTTL/LVCMOS to LVPECL translator. Because LVPECL (Positive ECL) levels are used, only +3.3 V and ground are required. The device has an OR-ed enable input which can accept either LVPECL (ENPECL) or TTL/LVCMOS inputs (ENTTL). If the inputs are left open, they will default to the enable state. The device design has been optimized for low channel-to-channel skew.

  • 450 ps Typical Propogation Delay
  • Maximum Frequency > 1.5 GHz Typical
  • PECL Mode
  • Operating Range: VCC = 3.0 V to 3.8 V with VEE = 0 V
  • PNP LVTTL Inputs for Minimal Loading
  • Q Outputs Will Default HIGH with Inputs Open
  • The 100 Series Contains Temperature Compensation

Tools and Resources

Product services, tools and other useful resources related to MC100EPT622

CAD Model

CAD Model

Material Composition

Product Change Notification

Reliability Data

Product List

If you wish to buy products or product samples, please log in to your ºìÌÒÊÓƵ account.

Search

Close Search

ºìÌÒÊÓƵ:

1

Share

Sort by

Product Groups:

┗

Orderable Parts:

1

Product

Status

CAD Models

Compliance

Package Type

Case Outline

MSL Type

MSL Temp (°C)

Container Type

Container Qty.

ON Target

Channels

Input Level

Output Level

VCC Typ (V)

fMax Typ (MHz)

tpd Typ (ns)

tR & tF Max (ps)

Reference Price

MC100EPT622MNG

Loading...

Active

CAD Model

Pb

A

H

P

QFN-32

488AM

1

260

TUBE

74

Y

10

TTL

ECL

3.3

1500

0.5

450

Price N/A

More Details

Show More

1-25 of 25

ºìÌÒÊÓƵ per page

Jump to :

1
contact sales icon

Support on the go

Find and compare products, get support and connect with ºìÌÒÊÓƵ sales team.

Reliability Data

Die Related Summary Data

Device: MC100EPT622MNG

Equivalent to wafer fab process: MOSAIC

Product Technology

Product Technology

Equivalent Device-Hours

MTBF/MTTF in Hours

FITS

MOSAIC

0

476668904

More Details

Re-calculate Data

Data is based on the following assumptions.

Note: The temperature and confidence level may be adjusted to your requirements.

Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)

New Search